User:Matt Hartings/Notebook/3D Printing/2016/01/06: Difference between revisions
From OpenWetWare
(Autocreate 2016/01/06 Entry for User:Matt_Hartings/Notebook/3D_Printing) |
|||
Line 6: | Line 6: | ||
| colspan="2"| | | colspan="2"| | ||
<!-- ##### DO NOT edit above this line unless you know what you are doing. ##### --> | <!-- ##### DO NOT edit above this line unless you know what you are doing. ##### --> | ||
== | ==Paper Revisions== | ||
Testing Materials | |||
# XRD | |||
## 5 samples for XRD | |||
### TiO2 | |||
### solvent cast ABS | |||
### solvent cast 1% TiO2 | |||
### solvent cast 5% TiO2 | |||
### solvent cast 10% TiO2 | |||
## Running conditions | |||
### Stationary sample holder | |||
### Two theta from 3 to 90 | |||
### 0.02 A steps | |||
# FTIR | |||
## Took spectra of solvent cast samples | |||
### 0% | |||
### 1% (made yesterday) | |||
### 1% (made 10./2014) | |||
### 5% (made yesterday) | |||
### 5% (made 10./2014) | |||
# Photochemistry | |||
## Used Doug's photochem setup | |||
## Placed broken dog bones in vials with water | |||
## Placed in photochem setup for 6 hours | |||
## removed dog bones to dry over night | |||
Making materials | |||
# Using Doug's Compounder | |||
# 0% sample | |||
## Set temperature to 195 C | |||
## Set motor to 80 rpm | |||
## Added 12 g of cut solvent-cast polymer into the hopper | |||
## After everything had been added for 5 minutes, opened the valve to extrude | |||
## After extrusion, open the face and clean out all of the polymer | |||
# Repeat process for 1%, 5%, and 10% | |||
<!-- ##### DO NOT edit below this line unless you know what you are doing. ##### --> | <!-- ##### DO NOT edit below this line unless you know what you are doing. ##### --> |
Revision as of 13:38, 8 January 2016
Project name | <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page <html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html> </html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html> |
Paper RevisionsTesting Materials
Making materials
|