User:Matthew R Skorski/Notebook/Cellulose Summer 2014/2014/10/17: Difference between revisions
(Autocreate 2014/10/17 Entry for User:Matthew_R_Skorski/Notebook/Cellulose_Summer_2014) |
|||
| Line 7: | Line 7: | ||
<!-- ##### DO NOT edit above this line unless you know what you are doing. ##### --> | <!-- ##### DO NOT edit above this line unless you know what you are doing. ##### --> | ||
==Entry title== | ==Entry title== | ||
Purpose: Printing Raftless Dogbones | |||
Safety and Procedure: See 10/8 for details about specs, only variable that changes is feeddiameter | |||
Experimental: | |||
1% NR4. Diameter of the filament 1.78 mm to 1.81 mm. Selecting 1.80 mm for filament diameter in the printing profile. One end started lifting up off the base, making it a bit off from normal but still usable. | |||
1% NR5. Diameter of the filament 1.85 mm to 1.90 mm. Selecting 1.88 mm for filament diameter in the printing profile. | |||
1% NR6. Diameter of the filament 1.86 mm to 1.89 mm. Selecting 1.88 mm for filament diameter in the printing profile. | |||
1% NR7. Diameter of the filament 1.84 mm to 1.84 mm. Selecting 1.84 mm for filament diameter in the printing profile. This filament went thin to thick over the distance measured, errors may occur with printing in the center. | |||
1% NR8. Diameter of the filament 1.71 mm to 1.85 mm. Selecting 1.79 mm for filament diameter in the printing profile. | |||
1% NR9. Diameter of the filament 1.88 mm to 1.83 mm. Selecting 1.86 mm for filament diameter in the printing profile. | |||
1% NR10. Diameter of the filament 1.85 mm to 1.82 mm. Selecting 1.84 mm for filament diameter in the printing profile. | |||
Started printing with 5% filament made on 9/24. Printing from top to bottom like 1%. | |||
HPLC testing samples | |||
5% Post Filabot (PF5): 0.0413 g | |||
5% Post Printer (P3D5): 0.0469 g | |||
5% NR1. Diameter of the filament 1.42 mm to 1.54 mm. Selecting 1.48 mm for filament diameter in the printing profile. | |||
5% NR2. Diameter of the filament 1.53 mm to 1.62 mm. Selecting 1.58 mm for filament diameter in the printing profile. | |||
<!-- ##### DO NOT edit below this line unless you know what you are doing. ##### --> | <!-- ##### DO NOT edit below this line unless you know what you are doing. ##### --> | ||
Revision as of 11:52, 29 October 2014
 Project name
|
<html><img src="/images/9/94/Report.png" border="0" /></html> Main project page <html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html> </html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html> |
Entry titlePurpose: Printing Raftless Dogbones Safety and Procedure: See 10/8 for details about specs, only variable that changes is feeddiameter Experimental: 1% NR4. Diameter of the filament 1.78 mm to 1.81 mm. Selecting 1.80 mm for filament diameter in the printing profile. One end started lifting up off the base, making it a bit off from normal but still usable. 1% NR5. Diameter of the filament 1.85 mm to 1.90 mm. Selecting 1.88 mm for filament diameter in the printing profile. 1% NR6. Diameter of the filament 1.86 mm to 1.89 mm. Selecting 1.88 mm for filament diameter in the printing profile. 1% NR7. Diameter of the filament 1.84 mm to 1.84 mm. Selecting 1.84 mm for filament diameter in the printing profile. This filament went thin to thick over the distance measured, errors may occur with printing in the center. 1% NR8. Diameter of the filament 1.71 mm to 1.85 mm. Selecting 1.79 mm for filament diameter in the printing profile. 1% NR9. Diameter of the filament 1.88 mm to 1.83 mm. Selecting 1.86 mm for filament diameter in the printing profile. 1% NR10. Diameter of the filament 1.85 mm to 1.82 mm. Selecting 1.84 mm for filament diameter in the printing profile. Started printing with 5% filament made on 9/24. Printing from top to bottom like 1%. HPLC testing samples 5% Post Filabot (PF5): 0.0413 g 5% Post Printer (P3D5): 0.0469 g 5% NR1. Diameter of the filament 1.42 mm to 1.54 mm. Selecting 1.48 mm for filament diameter in the printing profile. 5% NR2. Diameter of the filament 1.53 mm to 1.62 mm. Selecting 1.58 mm for filament diameter in the printing profile. | |
