User:Matthew R Skorski/Notebook/Cellulose Summer 2014/2014/10/22
 Project name
|
<html><img src="/images/9/94/Report.png" border="0" /></html> Main project page <html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html> </html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html> |
Entry titlePurpose: Printing Raftless Dogbones Safety and Procedure: See 10/8 for details about specs, only variable that changes is feeddiameter Experimental: 5% NR3. Diameter of the filament 1.58 mm to 1.68 mm. Selecting 1.64 mm for filament diameter in the printing profile. Print failed as the end nearest the opening lifted off during the printing process. 5% NR3 (one that will be kept and tested). Diameter of the filament 1.58 mm to 1.73 mm. Selecting 1.66 mm for filament diameter in the printing profile. 5% NR4. Diameter of the filament 1.65 mm to 1.73 mm. Selecting 1.69 mm for filament diameter in the printing profile. 5% NR5. Diameter of the filament 1.75 mm to 1.72 mm. Selecting 1.73 mm for filament diameter in the printing profile. 5% NR6. Diameter of the filament 1.75 mm to 1.73 mm. Selecting 1.74 mm for filament diameter in the printing profile. 5% NR7. Diameter of the filament 1.68 mm to 1.77 mm. Selecting 1.73 mm for filament diameter in the printing profile. Print failed as the printer stopped working when the laptop was shut. 5% NR7 (one that will be kept and tested). Diameter of the filament 1.72 mm to 1.75 mm. Selecting 1.73 mm for filament diameter in the printing profile. 5% NR8. Diameter of the filament 1.73 mm to 1.75 mm. Selecting 1.74 mm for filament diameter in the printing profile. 5% NR9. Diameter of the filament 1.74 mm to 1.76 mm. Selecting 1.75 mm for filament diameter in the printing profile. 5% NR10. Diameter of the filament 1.77 mm to 1.73 mm. Selecting 1.75 mm for filament diameter in the printing profile. Started printing with 10% filament made on 10/8 with castings from 9/24 and 9/26. Printing from bottom (end) to top (start) of the filament. HPLC testing samples 10% Post Filabot (PF10): 0.0561 g 10% Post Printer (P3D10): 0.0422 g 10% NR1. Diameter of the filament 1.48 mm to 1.53 mm. Selecting 1.51 mm for filament diameter in the printing profile. 10% NR2. Diameter of the filament 1.51 mm to 1.63 mm. Selecting 1.57 mm for filament diameter in the printing profile. 10% NR3. Diameter of the filament 1.59 mm to 1.70 mm. Selecting 1.65 mm for filament diameter in the printing profile. 10% NR4. Diameter of the filament 1.70 mm to 1.73 mm. Selecting 1.72 mm for filament diameter in the printing profile. | |
