User:Megan L. Channell/Notebook/3D printing scaffolds with Au nanofibers/2014/02/04: Difference between revisions

From OpenWetWare
Jump to navigationJump to search
Line 26: Line 26:
*Volumes of Au, Myoglobin, and water for each test tube:
*Volumes of Au, Myoglobin, and water for each test tube:
**Final [Au]=0.5mM, 5mL total volume
**Final [Au]=0.5mM, 5mL total volume
[
*For the new solutions, one will have a tall scaffold, another with four scaffold that equal the tall scaffold, and the third one will have a short one
 
*The other nine solutions will be used for later testing
*The 12 were put in the oven for 4hrs at 80°C
<!-- ##### DO NOT edit below this line unless you know what you are doing. ##### -->
<!-- ##### DO NOT edit below this line unless you know what you are doing. ##### -->
|}
|}


__NOTOC__
__NOTOC__

Revision as of 22:16, 6 February 2014

Project name <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page
<html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html>

Entry title

  • Nanofibers formed but were not the color that they were suppose to be
  • The concentration of gold and myoglobin were increased and new solutions were made
  • Taller scaffolds were printed, so the entire solution had scaffold present

Results From Last Time

  • 100:1 Gold:Myoglobin Nanofibers alone
  • 100:1 Gold:Myoglobin Nanofibers on PLA scaffolds<br.>
  • <br.>
  • 100:1 Gold:Myoglobin Nanofbiers on PLA sacffold- under microscope<br.>

Calculations

  • For the new Au:Myoglobin solutions, we used:

  • Au stock solution:
    • 0.011g x (1 mol/393.833g) x 0.010L = 2.793mM
  • Myoglobin stock solution:
    • 0.011g x (1 mol/17699g) x 0.010L = 0.0621mM
  • Volumes of Au, Myoglobin, and water for each test tube:
    • Final [Au]=0.5mM, 5mL total volume
  • For the new solutions, one will have a tall scaffold, another with four scaffold that equal the tall scaffold, and the third one will have a short one
  • The other nine solutions will be used for later testing
  • The 12 were put in the oven for 4hrs at 80°C


Retrieved from "https://openwetware.org/mediawiki/index.php?title=User:Megan_L._Channell/Notebook/3D_printing_scaffolds_with_Au_nanofibers/2014/02/04&oldid=769841"