The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
 Project name
|
<html><img src="/images/9/94/Report.png" border="0" /></html> Main project page
<html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html> </html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html>
|
DSC and new samples
- The last time I did DSC, it could not finish because there was not enough nitrogen. I made new samples and re-run them. The new samples I made were the 0, 0.1, 0.5, 1, 5, and 10% but this time, I added the MOF-5 and the solvent together and sonicated them. Once they were fully dissolved, I put the PLA in and sonicated them. Once everything was fully dissolved I poured them into the molds and let them sit overnight.
- 0.1 %, 0.5 %, 1.0 %, 5.0 %, 10 % and 0 % w/v.
- 0.1 % - 1.0001 g PLA, 0.001 g MOF-5, 10 mL dichloromethane
- 0.5 % - 0.9944 g PLA, 0.0048 g MOF-5, 10 mL dichloromethane
- 1.0 % - 0.9903 g PLA, 0.0097 g MOF-5, 10 mL dichloromethane
- 5.0 % - 0.509 g PLA, 0.0495 g MOF-5, 10 mL dichloromethane
- 10.0 % - 0.8993 g PLA, 0.999 g MOF-5, 10 mL dichloromethane
- 0 % - 0.9998 g PLA, 10 mL dichloromethane
|
Project name
