User:Melissa Novy/Notebook/CHEM-581/2012/09/26

From OpenWetWare

< User:Melissa Novy | Notebook | CHEM-581 | 2012 | 09(Difference between revisions)
Jump to: navigation, search
Current revision (17:39, 22 October 2012) (view source)
(Objectives)
 
(3 intermediate revisions not shown.)
Line 16: Line 16:
==Objectives==
==Objectives==
* Make clay-CuSO<sub>4</sub> exchange solutions for atomic absorption analysis.
* Make clay-CuSO<sub>4</sub> exchange solutions for atomic absorption analysis.
-
** Atomic absorption will be conducted on 2012/09/28.
+
** Atomic absorption will be conducted on [[User:Melissa_Novy/Notebook/CHEM-581/2012/10/05|2012/10/05]].
* Make PVOH-clay-glutaraldehyde films.
* Make PVOH-clay-glutaraldehyde films.
 +
** PVOH (MW 22000), 0.1 wt% NaMT, 0.8 wt% glutaraldehyde
 +
** PVOH (MW 22000), 0.1 wt% 100%CEC NaMT, 0.8 wt% glutaraldehyde
 +
** Please refer to [[User:Moira_M._Esson/Notebook/CHEM-581/2012/09/26|Moira Esson's entry]] for masses added to make PVOH films.
==Clay-CuSO<sub>4</sub> Exchange Solutions==
==Clay-CuSO<sub>4</sub> Exchange Solutions==
Line 29: Line 32:
* The following clays were exchanged for 1 min, 5 min, and 10 min:
* The following clays were exchanged for 1 min, 5 min, and 10 min:
** Na-MT
** Na-MT
-
** 100% CEC (Bu<sub>3</sub>HdP<sub>+</sub>)-MT
+
** 100% CEC (Bu<sub>3</sub>HdP<sup>+</sup>)-MT
-
** 50% CEC (Bu<sub>3</sub>HdP<sub>+</sub>)-MT
+
** 50% CEC (Bu<sub>3</sub>HdP<sup>+</sup>)-MT
 +
 
 +
==Notes==
 +
* ? filtrate were transparent and faintly green in color.

Current revision

Search this Project

Customize your entry pages

Objectives

  • Make clay-CuSO4 exchange solutions for atomic absorption analysis.
    • Atomic absorption will be conducted on 2012/10/05.
  • Make PVOH-clay-glutaraldehyde films.
    • PVOH (MW 22000), 0.1 wt% NaMT, 0.8 wt% glutaraldehyde
    • PVOH (MW 22000), 0.1 wt% 100%CEC NaMT, 0.8 wt% glutaraldehyde
    • Please refer to Moira Esson's entry for masses added to make PVOH films.

Clay-CuSO4 Exchange Solutions

  • Protocol:
    1. Pour 20 mL of CuSO4 stock solution into a beaker with a stir bar.
    2. As the solution is stirring, add 0.1 g of clay and begin the timer.
    3. Filter the solution with dry 42 Whatman paper into a filter flask immediately after the set time period has ended. Make sure that all glassware and equipment is clean and dry.
    4. Save the both the filtrate and the filtered clay.
    5. Wash all glassware and equipment first with H2O and then with acetone for later use.


  • The following clays were exchanged for 1 min, 5 min, and 10 min:
    • Na-MT
    • 100% CEC (Bu3HdP+)-MT
    • 50% CEC (Bu3HdP+)-MT

Notes

  •  ? filtrate were transparent and faintly green in color.



Personal tools