User:Michael F. Nagle/Notebook/Chem 571/2012/10/02

From OpenWetWare

(Difference between revisions)
Jump to: navigation, search
(Discussion)
Line 15: Line 15:
#A .2M buffer of sodium phosphate was made at a pH of 7.
#A .2M buffer of sodium phosphate was made at a pH of 7.
#.0017M hydrogen peroxide solution was made by adding 1mL 30% hydrogen peroxide to 100mL distilled water. 1mL of hydrogen peroxide solution was diluted to 50mL with 49mL of sodium phosphate buffer for 34μM solution.  
#.0017M hydrogen peroxide solution was made by adding 1mL 30% hydrogen peroxide to 100mL distilled water. 1mL of hydrogen peroxide solution was diluted to 50mL with 49mL of sodium phosphate buffer for 34μM solution.  
-
#698μM iodophenol solution was made in 1mL DMSO, since it's not soluble in water. 2.5mM 4-aminoantipyrine solution was prepared with the sodium phosphate buffer.
+
#698μM iodophenol solution was made in 1mL DMSO, since it's not soluble in water. 2.5mM 4-aminoantipyrine (AAP) solution was prepared with the sodium phosphate buffer.
 +
#From the stocks, solution was prepared with 18mM iodophenol, 7.285μM AAP, 1.7mM H<sub>2</sub>O<sub>2</sub> and 115nM HRP.
 +
##Such a solution was analyzed for the 1st, 3rd and 4th runs.
 +
##For the 2nd run, HRP was increased to 2.3μM while AAP was kept at 7.285μM
 +
##HRP was increased to 50μM and AAP to 156.25 μM for the final trial.
 +
 
 +
==Data==
 +
[[Image:Hrp1.png]]
==Discussion==
==Discussion==

Revision as of 03:22, 7 December 2012

Project name Main project page
Previous entry      Next entry

Objective

  • Prepare reagents for horseradish peroxidase (HRP) assay
    • Complete HRP assay with and without gold nanoparticles to see if they interact with HRP's active site

Procedure

  1. HRP procedure1 was followed. Time was plotted against absorbance on the UV/Vis spectroscoper.
  2. 1mg horseradish peroxidase was dissolved in 1mL distilled water.
  3. A .2M buffer of sodium phosphate was made at a pH of 7.
  4. .0017M hydrogen peroxide solution was made by adding 1mL 30% hydrogen peroxide to 100mL distilled water. 1mL of hydrogen peroxide solution was diluted to 50mL with 49mL of sodium phosphate buffer for 34μM solution.
  5. 698μM iodophenol solution was made in 1mL DMSO, since it's not soluble in water. 2.5mM 4-aminoantipyrine (AAP) solution was prepared with the sodium phosphate buffer.
  6. From the stocks, solution was prepared with 18mM iodophenol, 7.285μM AAP, 1.7mM H2O2 and 115nM HRP.
    1. Such a solution was analyzed for the 1st, 3rd and 4th runs.
    2. For the 2nd run, HRP was increased to 2.3μM while AAP was kept at 7.285μM
    3. HRP was increased to 50μM and AAP to 156.25 μM for the final trial.

Data

Image:Hrp1.png

Discussion

  1. The HRP assays were not completed today, but will be 10/3, with the reagents prepared today

References

1. Horseradish Peroxidase Assay. Gold Biotechnology Image:3760-Protocol HRP AbsorbanceAssay.pdf


Personal tools