User:Michael R Phillips/Notebook/Physics 307L/2008/10/29: Difference between revisions
Line 28: | Line 28: | ||
|579.0 | |579.0 | ||
|578.2 | |578.2 | ||
| | |578.5 | ||
|- | |- | ||
|yellow2 | |yellow2 | ||
|577.0 | |577.0 | ||
|576.0 | |576.0 | ||
| | |576.0 | ||
|- | |- | ||
|green | |green | ||
|546.1 | |546.1 | ||
|545.3 | |545.3 | ||
| | |545.0 | ||
|- | |- | ||
|violet | |violet | ||
|435.8 | |435.8 | ||
|435.4 | |435.4 | ||
| | |435.2 | ||
|- | |- | ||
|deep violet | |deep violet | ||
|404.7 | |404.7 | ||
|404.3 | |404.3 | ||
| | |404.5 | ||
|- | |- | ||
|} | |} | ||
We found in our spectrum several low intensity lines that the lab manual indicated were from impurities in the sample, we also found the blue-green line that we were directed to skip in the procedure. | |||
Revision as of 14:24, 29 October 2008
Balmer Series | <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page <html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html> </html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html> | ||||||||||||||||||||||||||||
Balmer SeriesIntroduction & SafetyIn this lab, we will be using a very old Constant Deviation Spectrometer to measure the Rydberg constant based on the spectra of Hydrogen and Deuterium, and also the difference between the spectral wavelengths for these two. As for safety, the main thing is don't get electrocuted. This means turning off and unplugging the lamp power before removing or inserting a new bulb. Other important things to note, for equipment safety rather than our own, is that we should never touch the prism because we could easily damage it with fingerprints and that we should be very careful not to break the bulbs. CalibrationBefore we do any real data taking, we need to perform a simple calibration for our instrument. For this, we will use the given values of wavelengths (λ) and colors to match to our corresponding wavelengths and colors. In the end of the experiment, we will use this data to account for a kind of "calibration error" that will appear in every part of our data. Here is the data we took for initial calibration:
We found in our spectrum several low intensity lines that the lab manual indicated were from impurities in the sample, we also found the blue-green line that we were directed to skip in the procedure.
|