User:Michael S. Bible/Notebook/581/2014/10/01: Difference between revisions
From OpenWetWare
(Autocreate 2014/10/01 Entry for User:Michael_S._Bible/Notebook/581) |
|||
Line 14: | Line 14: | ||
==Description== | ==Description== | ||
<u>Diffusion</u> | |||
# Our group used a PVA film | |||
# Jake, Mary, and James used a PVA/clay film | |||
##We prepared the diffusion chambers in the following manner | |||
# Set the film between the two chambers | |||
# Added liquid to each chamber | |||
## One chamber was filled with 10 mL water | |||
## The other chamber was filled with 10 mL 20ppm Malachite green | |||
# Withdraw 200uL from each chamber at the 5 minute mark and place in their own eppy tube | |||
## NOTE: I want the groups to coordinate so that their 5 minutes don't overlap with one another. | |||
## NOTE: We used a small volume cuvette | |||
## NOTE: We took a 0 minute measurement for each. | |||
## NOTE: We had to dilute the sample from our chamber with the 20ppm. We used a 1:2 dilution each time. So, when we returned the sample, we only returned the non-diluted sample. | |||
# We measured the UV-Vis spectrum for both samples and returned each to the chamber it originally came from | |||
# We took measurements at the following times | |||
## 6 minutes | |||
## 17 minutes | |||
## 30 minutes | |||
## 1 hour | |||
## 2 hours | |||
## right before we left lab | |||
==Data== | ==Data== |
Revision as of 06:53, 1 October 2014
Biomaterials Design Lab | <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page <html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html> </html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html> |
ObjectivePut your objective here. DescriptionDiffusion
Data
NotesAdd notes here.
|