|Experimental Chemistry|| Main project page|
Previous entry Next entry
Acid Catalytic Dehydration reaction in cross-linking of glutaraldehyde, solubility tests of the resultant film, swelling studies and neutralization of films in sodium carbonate solution.
In a 100 ml of water solution, 20 g of sodium sulfate was placed. Once the solution was dissolved, 2 ml of the concentrated sulfuric acid was added. The resultant mixture was allowed to reach at the temperature of 70 deg Celsius before adding 0.1 g of PVOH having the molar mass of 22,000 cross-linked with glutaraldehyde film. When 1 hour was elapsed, the film was taken out of the solution and was rinsed several times with distilled water before it was placed in to 1% aqueous hydrochloric acid solution for half hour.0.2 M sodium carbonate (Na2CO3) solution was prepared in a separate beaker and after about half hour, the film, treated with 1% HCl solution was placed in sodium carbonate solution for 15 mins. That process was taken place inside the fume hood on a hot plate, with no heat or stirring involved.
Another PVOH (MW of 22,000) film was prepared in 5 ml deionized water solution. After PVOH was dissolved in water, 1 ml of glutaraldehyde was added to the resultant mixture and the entire mixture was then placed in to Teflon plate. The solution was finally allowed to dry inside the fume hood.
Calculating The Mass of Sodium Carbonate:
(0.2 mol Na2CO3/L) * (1 L/1,000 ml) * (100 ml) * (84.007 g Na2CO3/1mol Na2CO3 = 1.68 g Na2CO3 (sodium carbonate).
This area is for any observations or conclusions that you would like to note.