User:Mobeen Ashraf/Notebook/Chem-581/2012/11/07

From OpenWetWare

< User:Mobeen Ashraf | Notebook/Chem-581 | 2012 | 11(Difference between revisions)
Jump to: navigation, search
(→Objective)
Current revision (15:37, 28 November 2012) (view source)
(→Description)
 
(4 intermediate revisions not shown.)
Line 13: Line 13:
*Kinetics Studies
*Kinetics Studies
** Adsorption of CuSO4
** Adsorption of CuSO4
 +
 +
* DSC on glutaraldehyde and clay films
==Description==
==Description==
-
* 3 PVOH films were prepared: 0.5 g MW of 22,000, 1 ml glutaraldehyde, and 1 ml of porphrine dihydrogen chloride.
+
*It was directed to perform kinetics studies and adsorption of CuSO4 on glutaraldehyde (cross-linked) and Na-MT and any one of the exchange PVOH films (100 % CEC was selected).
-
* AAS studies for all the Cu standards: NaMT- concentration of 1.25 g/500 ml, for 1min, 5 min and 10 mins standards, 50 % CEC exchange-concentration of 1.25 g/500 ml, for 1 min, 5 min and 10 mins standards, 100% CEC exchange, for 1 min, 5 min and 10 mins standards, and Fe3O4-concentration of 1.25 g/500 ml, for 1 min, 5 min and 10 mins standards.
+
 
 +
* DSC analysis was done on glutaraldehyde and clay films. The pieces were cut in to small fragments, and were allowed to sit out to get moistured.
 +
 
 +
* For DSC analysis:
 +
**0.00269 g of PVOH (MW=22,000g/mol)/glutaraldehyde(1 ml) films was placed in cell holder number A1
 +
**0.00353 g of 1g PVOH (MW=22,000g/mol) with H3PO4 and maleic acid was placed in cell holder number B1
 +
**0.0039 g of half gram PVOH (MW=100,000g/mol), HCl and succinic acid was placed in cell holder number C1
 +
**0.00316 g of half gram PVOH (MW=100,000g/mol), H2O, maleic acid and H3PO4 was placed in cell holder D1
==Data==
==Data==

Current revision

Experimental Chemistry Main project page
Previous entry      Next entry


Objective

  • Kinetics Studies
    • Adsorption of CuSO4
  • DSC on glutaraldehyde and clay films

Description

  • It was directed to perform kinetics studies and adsorption of CuSO4 on glutaraldehyde (cross-linked) and Na-MT and any one of the exchange PVOH films (100 % CEC was selected).
  • DSC analysis was done on glutaraldehyde and clay films. The pieces were cut in to small fragments, and were allowed to sit out to get moistured.
  • For DSC analysis:
    • 0.00269 g of PVOH (MW=22,000g/mol)/glutaraldehyde(1 ml) films was placed in cell holder number A1
    • 0.00353 g of 1g PVOH (MW=22,000g/mol) with H3PO4 and maleic acid was placed in cell holder number B1
    • 0.0039 g of half gram PVOH (MW=100,000g/mol), HCl and succinic acid was placed in cell holder number C1
    • 0.00316 g of half gram PVOH (MW=100,000g/mol), H2O, maleic acid and H3PO4 was placed in cell holder D1

Data

  • Add data and results here...

Notes

This area is for any observations or conclusions that you would like to note.


Use categories like tags. Change the "Course" category to the one corresponding to your course. The "Miscellaneous" tag can be used for particular experiments, as instructed by your professor. Please be sure to change or delete this tag as required so that the categories remain well organized.



Retrieved from "http://www.openwetware.org/wiki/User:Mobeen_Ashraf/Notebook/Chem-581/2012/11/07"
Personal tools