User:Moira M. Esson/Notebook/CHEM-581/2012/09/26

From OpenWetWare

< User:Moira M. Esson | Notebook | CHEM-581 | 2012 | 09(Difference between revisions)
Jump to: navigation, search
(Objectives)
Current revision (11:15, 26 October 2012) (view source)
(CuSO4 exchanged solutions)
 
(3 intermediate revisions not shown.)
Line 16: Line 16:
     *1.0gPVOH+0.1g NaMT+0.8wt% glutaraldehyde
     *1.0gPVOH+0.1g NaMT+0.8wt% glutaraldehyde
     *1.0gPVOH+0.1g 100% CEC (Bu<sub>3</sub>HdP<sup>+</sup>)-MT surfactant clay+0.8wt% glutaraldehyde
     *1.0gPVOH+0.1g 100% CEC (Bu<sub>3</sub>HdP<sup>+</sup>)-MT surfactant clay+0.8wt% glutaraldehyde
 +
==CuSO<sub>4</sub> exchanged solutions==
==CuSO<sub>4</sub> exchanged solutions==
General Protocol:
General Protocol:
Line 22: Line 23:
# Add 0.1g clay to solution while solution is stirring. '''Immediately''' start a timer.
# Add 0.1g clay to solution while solution is stirring. '''Immediately''' start a timer.
# Allow solution to stir for desired amount of time(for this experiment the time intervals 1min, 5min, and 10min will be used).
# Allow solution to stir for desired amount of time(for this experiment the time intervals 1min, 5min, and 10min will be used).
-
# Once the time period has ended, '''immediately''' filter the solution with a '''dry''' 42 Whatman filter paper  
+
# Once the time period has ended, '''immediately''' filter the solution with a '''dry''' 42 Whatman filter paper
 +
# Collect clay from filter paper and dry. Save clay for later analysis
*Note: Make sure that all glassware is clean and dry. To ensure that the glassware is dry, rinse the glassware with acetone and place in an oven(~60°C) for ~5min to dry.
*Note: Make sure that all glassware is clean and dry. To ensure that the glassware is dry, rinse the glassware with acetone and place in an oven(~60°C) for ~5min to dry.
<br>
<br>
 +
'''CuSO<sub>4</sub> exchanged solutions'''
 +
 +
 +
{| {{table}}
 +
| align="center" style="background:#f0f0f0;"|'''Type of clay'''
 +
| align="center" style="background:#f0f0f0;"|'''time stirred (min)'''
 +
|-
 +
| NaMT||1
 +
|-
 +
| NaMT||5
 +
|-
 +
| NaMT||10
 +
|-
 +
| 100% CEC||1
 +
|-
 +
| 100% CEC||5
 +
|-
 +
| 100% CEC||10
 +
|-
 +
| 50% CEC||1
 +
|-
 +
| 50% CEC||5
 +
|-
 +
| 50% CEC||10
 +
|}

Current revision

Project name Main project page
Previous entry      Next entry

Objectives

  1. Finish standards prep(1-1/50 of 20ppm stocks, 4-6standards for each)
  2. Add NaMT to CuSO4 blue solution prepared on 09/21/2012
  3. Prepare solutions for atomic absorption analysis:
   *NaMT-CuSO4 exchange solution
   *100% CEC (Bu3HdP+)-MT surfactant clay-CuSO4 exchange solution
   *50% CEC (Bu3HdP+)-MT surfactant clay-CuSO4 exchange solution
  1. Prepare films:
   *1.0gPVOH+0.1g NaMT+0.8wt% glutaraldehyde
   *1.0gPVOH+0.1g 100% CEC (Bu3HdP+)-MT surfactant clay+0.8wt% glutaraldehyde

CuSO4 exchanged solutions

General Protocol:

  1. Pour 20mL of CuSO4 stock solution(prepared on 09/21/2012) into a clean beaker with a magnetic stirrer.
  2. Stir solution breifly(~1min)
  3. Add 0.1g clay to solution while solution is stirring. Immediately start a timer.
  4. Allow solution to stir for desired amount of time(for this experiment the time intervals 1min, 5min, and 10min will be used).
  5. Once the time period has ended, immediately filter the solution with a dry 42 Whatman filter paper
  6. Collect clay from filter paper and dry. Save clay for later analysis
  • Note: Make sure that all glassware is clean and dry. To ensure that the glassware is dry, rinse the glassware with acetone and place in an oven(~60°C) for ~5min to dry.


CuSO4 exchanged solutions


Type of clay time stirred (min)
NaMT1
NaMT5
NaMT10
100% CEC1
100% CEC5
100% CEC10
50% CEC1
50% CEC5
50% CEC10



Personal tools