User:Moira M. Esson/Notebook/CHEM-581/2012/11/14

From OpenWetWare

Jump to: navigation, search
Project name Main project page
Previous entry      Next entry

Objectives

  1. Perform polyvinyl acetate synthesis
  2. ISE film preparation(do this for film selectivity)

ISE film preparation

General Protocol

  1. Cut PVOH film in half. Place each half in a 100mL beaker. There will be two beakers used for each film.
  2. Fill one beaker with ~50mL 20ppm CuSO4 stock solution. Make sure enough solution is used to completely cover the film.
  3. Fill the second beaker with ~50mL 20ppm NaSO4 stock solution. Make sure enough solution is used to completely cover the film.
  4. Allow the films to sit for ~48hours

Notes:

  • The films that were used were PVOH(MW 22K)+0.8wt% GA crosslinked and PVOH(MW 22K)+0.8wt% GA+NaMT crosslinked


Acetylation

  • The general protocol for acetylation described [[Category:]]




Retrieved from "http://www.openwetware.org/wiki/User:Moira_M._Esson/Notebook/CHEM-581/2012/11/14"
Personal tools