User:Moira M. Esson/Notebook/CHEM-581/2013/02/27

From OpenWetWare

(Difference between revisions)
Jump to: navigation, search
(Entry title)
(Pressure tests)
Line 13: Line 13:
*Pressure tests were performed on all hydrogels prepared with Rhodamine 6G added.
*Pressure tests were performed on all hydrogels prepared with Rhodamine 6G added.
*After the sheer pressure test conducted on [[User:Moira_M._Esson/Notebook/CHEM-581/2013/02/22|2013/02/22]], it was determined that a bent pipette and an unmodified pipette would be used to conduct the pressure tests. Each hydrogel will have at least two pressure tests conducted with the hydrogel: one with a bent pipette and the other with an unmodified pipette.
*After the sheer pressure test conducted on [[User:Moira_M._Esson/Notebook/CHEM-581/2013/02/22|2013/02/22]], it was determined that a bent pipette and an unmodified pipette would be used to conduct the pressure tests. Each hydrogel will have at least two pressure tests conducted with the hydrogel: one with a bent pipette and the other with an unmodified pipette.
-
*All pressure tests were conducted   
+
*All pressure tests were conducted following the general protocol described on [[User:Moira_M._Esson/Notebook/CHEM-581/2013/02/22|2013/02/22]].
 +
,br>
 +
Table
 +
<br>
 +
Figure 1. Image of bent pipette used for pressure testing
 +
    

Revision as of 23:29, 2 March 2013

Project name Main project page
Previous entry      Next entry

Objectives

  1. Perform pressure tests on all prepared hydrogels using a bent pipette.
  2. Run fluorescence on the samples obtained from the pressure tests.


Pressure tests

  • Pressure tests were performed on all hydrogels prepared with Rhodamine 6G added.
  • After the sheer pressure test conducted on 2013/02/22, it was determined that a bent pipette and an unmodified pipette would be used to conduct the pressure tests. Each hydrogel will have at least two pressure tests conducted with the hydrogel: one with a bent pipette and the other with an unmodified pipette.
  • All pressure tests were conducted following the general protocol described on 2013/02/22.

,br> Table
Figure 1. Image of bent pipette used for pressure testing



Personal tools