User:Moira M. Esson/Notebook/CHEM-581/2013/02/27

From OpenWetWare

(Difference between revisions)
Jump to: navigation, search
(→Pressure tests)
(→Pressure tests)
Line 14: Line 14:
*After the sheer pressure test conducted on [[User:Moira_M._Esson/Notebook/CHEM-581/2013/02/22|2013/02/22]], it was determined that a bent pipette and an unmodified pipette would be used to conduct the pressure tests. Each hydrogel will have at least two pressure tests conducted with the hydrogel: one with a bent pipette and the other with an unmodified pipette.
*After the sheer pressure test conducted on [[User:Moira_M._Esson/Notebook/CHEM-581/2013/02/22|2013/02/22]], it was determined that a bent pipette and an unmodified pipette would be used to conduct the pressure tests. Each hydrogel will have at least two pressure tests conducted with the hydrogel: one with a bent pipette and the other with an unmodified pipette.
*All pressure tests were conducted following the general protocol described on [[User:Moira_M._Esson/Notebook/CHEM-581/2013/02/22|2013/02/22]].
*All pressure tests were conducted following the general protocol described on [[User:Moira_M._Esson/Notebook/CHEM-581/2013/02/22|2013/02/22]].
-
,br>
+
<br>
Table
Table
<br>
<br>
Figure 1. Image of bent pipette used for pressure testing
Figure 1. Image of bent pipette used for pressure testing
-
 
+
[[Image:Bent pipette 2 27 13.jpg]]

Revision as of 23:34, 2 March 2013

Project name Main project page
Previous entry      Next entry

Objectives

  1. Perform pressure tests on all prepared hydrogels using a bent pipette.
  2. Run fluorescence on the samples obtained from the pressure tests.


Pressure tests

  • Pressure tests were performed on all hydrogels prepared with Rhodamine 6G added.
  • After the sheer pressure test conducted on 2013/02/22, it was determined that a bent pipette and an unmodified pipette would be used to conduct the pressure tests. Each hydrogel will have at least two pressure tests conducted with the hydrogel: one with a bent pipette and the other with an unmodified pipette.
  • All pressure tests were conducted following the general protocol described on 2013/02/22.


Table
Figure 1. Image of bent pipette used for pressure testing Image:Bent pipette 2 27 13.jpg



Retrieved from "http://www.openwetware.org/wiki/User:Moira_M._Esson/Notebook/CHEM-581/2013/02/27"
Personal tools