User:Monika Gasiorek/Notebook/CHEM-571 2014F/2015/03/04: Difference between revisions
Line 37: | Line 37: | ||
Samples were mistakenly pulled at the same timepoints as the thermolysin/AuNP fiber reactions, but only the 120 min timepoint will be run on the gels. | Samples were mistakenly pulled at the same timepoints as the thermolysin/AuNP fiber reactions, but only the 120 min timepoint will be run on the gels. | ||
=='''1 μM Chymotrypsin Kinetics'''== | |||
'''Protocol''' | |||
Switching to Chymotrypsin kinetics. Same protocol for OceanOptics, scan every 30 seconds for 2 hours at 37°C, spinning at 1000 RPM. | |||
For the solution prep, 104 μL of concentrated Chymotrypsin stock (24.00 μM) was diluted by 2.896 mL of Tris-10mM CaCl<sub>2</sub> buffer. | |||
'''Results''' | |||
Revision as of 13:07, 4 March 2015
Project name | <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page <html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html> </html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html> |
March 4th, 2015Thermolysin Reaction Preparation0.00063 g of Chymotrypsin was dissolved in 1 mL of Tris/NaCl buffer ---> stock [thermolysin] = 18.21 μM Bradford/Gel Analysis samples to be run: 1. 0.274(6) mL of stock solution in 4.725 mL of Tris/NaCl buffer
2. 0.027(4) mL of stock solution in 4.973 mL of Tris/NaCl buffer
3. 0.002(7) mL of stock solution in 4.997 mL of Tris/NaCl buffer
4. 10 μL of stock solution in 990 μL of Tris/NaCl buffer --> [trypsin] = 0.1821 μM
Fibers were spun down at 300 RPM for 5 minutes, and liquid extracted. 5 mL of protease solution was added to each sample tube. A 500 μL aliquot was obtained every 5 minutes until 30 minutes, timepoints including: 0 min, 5 min, 10 min, 15 min, 20 min, 25 min, 30 min. A 500 μL aliquot was obtained every 30 minutes after the first 30 min until 2 hours of total reaction, timepoints including: 60 min, 90 min, 120 min. The samples were shaken at 236 rpm and 37 C for the duration of the reaction time. Lysozyme control digestion55.6 μM lysozyme stock solution was prepared from 0.079 g of lysozyme in 100 mL of water. 0.5 mL of this stock solution was combined with 4.5 mL of water in order to produce 2 - 5 mL samples of 5.56 μM lysozyme solution. These were digested with thermolysin protease with total solution protease concentrations of 1 and 100 nM. See above procedure for thermolysin stock volumes resulting in given concentrations. Samples were mistakenly pulled at the same timepoints as the thermolysin/AuNP fiber reactions, but only the 120 min timepoint will be run on the gels. 1 μM Chymotrypsin KineticsProtocol Switching to Chymotrypsin kinetics. Same protocol for OceanOptics, scan every 30 seconds for 2 hours at 37°C, spinning at 1000 RPM. For the solution prep, 104 μL of concentrated Chymotrypsin stock (24.00 μM) was diluted by 2.896 mL of Tris-10mM CaCl2 buffer. Results
|