User:Pranav Rathi/Notebook/OT/2012/05/21/pH-rocker for DNA-sequencing experiments: Difference between revisions

Revision as of 16:59, 26 January 2013

Design and construction of the rocker is easy. It is one of the easiest things I made. I have completed all the work within 5 hours.

Most of the components were available in my lab. Some i bought. The slide show has all the parts with part number and company.

@@ Line 2: / Line 2: @@
 ==Motivation==
 ==Design and Construction==
+Design and construction of the rocker is easy. It is one of the easiest things I made. I have completed all the work within 5 hours.
 ===Components===
+Most of the components were available in my lab. Some i bought. The slide show has all the parts with part number and company.
+====pH-rocker stand====
+* 1 X MB6 thorlabs brad board
+* 2 X TR12-thorlabs posts
+* 1 X PH4 post holder
+* 1 X CL6-thorlabs clamp
+* Some 1/4 inch screws
+====Motor arm====
+* 1 X PK22G21-Hennkwell 12V high-torque planetary gear motor
+* 1 X CP0@T-thorlabs cage plate
+* 1 X TR6-thorlabs post
+* 1 X RA90-thorlabs post clamp
+* 1 X black disk (salvaged from a radio)
+* 1 X ER1-thorlabs 1 inch cage rod
+* 2 plastic wire holders and 2 rubber cushions
+* some 8/32 and 4/40 screws
+====Power supply====
+* Powerline variable DC-power supply from amazon.com
+====pH sensor====
+* PH37-SS Hach company pH sensor
+====Well plate====
+* 96 Well plate for DNA-sequencing
 ===Design===