Day 5
Goals
- Centrifuge the 7 samples of AuNP/BSA in order to separate out the fibers
- Run UV-Vis spectra's for the samples every 1 hour to test absorbency rates of the AuNP into the buffer.
- begin making solutions to replicate experiment based on article on blackboard.
Procedure
- The samples from yesterday were centrifuged in order to separate out the fibers
- They were then combined with 7 different concentrations of the pH 10 Tris buffer. Just as was similarly done the previous week. a serial dilution was done.
- prepare tris buffer and AuNP/BSA solution at a concentration of 70 for next weeks lab.
Calculations
- Solution was made with a mole ratio of 70
- 2.4268M BSA solution was used
- m1v1=m2v2
- 24.266μM * (volume) = 1μM * 6mL
- .247mL BSA solution
- 2150μM HAuCl4 solution was used
- 2150μM * (volume) = 6mL *(1μM*70)
- .195mL HAuCl4 solution
- 6-.195mL BSA -.247mL HAuCl4 = 5.558mL H2O was added
- Solutions went in oven at 85oC from 2:32-6:32
Tris Buffer
- MW= 121.14 g/mol per 1 Liter
make 100mL of solutions so..... 12.11grams of tris /100mL were mixed.
Conclusions
- pH 10 AuNP fibers + Tris buffer UV-Vis data showed that:
|