User:Ryan P. Long/Notebook/Physics 307L/2009/11/09: Difference between revisions
Ryan P. Long (talk | contribs) (→Part 1) |
Ryan P. Long (talk | contribs) (→Part 1) |
||
Line 56: | Line 56: | ||
with my slope and constant current e/m can be calculated: | with my slope and constant current e/m can be calculated: | ||
<math>\frac{e}{m}=\frac{1}{slope}\times \frac{2}{(7.8\cdot 10^{-4}\times 1.35)^{2}}=</math> | <math>\frac{e}{m}=\frac{1}{slope}\times \frac{2}{(7.8\cdot 10^{-4}\times 1.35)^{2}}=\frac{e}{m}=\frac{1}{.00000814}\times \frac{2}{(7.8\cdot 10^{-4}\times 1.35)^{2}}</math> | ||
<math>\frac{e}{m}=\frac{1}{.00000814}\times \frac{2}{(7.8\cdot 10^{-4}\times 1.35)^{2}}</math> | <math>\frac{e}{m}=\frac{1}{.00000814}\times \frac{2}{(7.8\cdot 10^{-4}\times 1.35)^{2}}</math> |
Revision as of 20:37, 21 November 2009
Project name | <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page <html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html> </html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html> | |||
e/m LabEquipment
SetupFirst we connected the HP power supply to the Helmholtz coils on the Uchida apparatus with one of the BK multimeters in series. Next the other BK multimeter was connected to the voltmeter jacks on the Uchida apparatus. The Soar power supply was connected to the heater jacks on the Uchida. Finally, the Gelman was connected to the electrodes on the Uchida. We followed the procedure in Professor Gold's manual, which included letting the heater warm up for 2 minutes before applying voltage to the electrodes on the apparatus. To take data, we let either let the voltage of the electrodes or the current running through the coils be constant, while varying the other parameter. We measured the radius of the rings on the right and the left side using the built in ruler.
DataNote: At a current of -1.35A, maximum accelerating voltage is 320V, the minimum is 165V. At -1.05A, the maximum voltage is 200V and the minimum is 100V. 11/16/09 Voltage applied to heater jacks: 6.24 V Raw Data:{{#widget:Google Spreadsheet |
key=0Ajaf_99vseiXdEIyXzJxWGJhLUQ2SE9qNGo4UURmMUE | width=760 | height=300
}} AnalysisGiven that: (From Alexandra Andrego's Lab Notebook):
We can calculate [math]\displaystyle{ \frac{e}{m}\,\! }[/math] based on the slope of a [math]\displaystyle{ \frac{V}{{r}^{2}}\,\! }[/math] line holding current constant, or the slope of a [math]\displaystyle{ \frac{r}{\frac{1}{I}}\,\! }[/math] line holding voltage constant. Part 1I calculated the slope and slope uncertainty of the line from my plot using the linest array function in excel. Using the equation:
with my slope and constant current e/m can be calculated: [math]\displaystyle{ \frac{e}{m}=\frac{1}{slope}\times \frac{2}{(7.8\cdot 10^{-4}\times 1.35)^{2}}=\frac{e}{m}=\frac{1}{.00000814}\times \frac{2}{(7.8\cdot 10^{-4}\times 1.35)^{2}} }[/math] [math]\displaystyle{ \frac{e}{m}=\frac{1}{.00000814}\times \frac{2}{(7.8\cdot 10^{-4}\times 1.35)^{2}} }[/math] Part 2 |