User:Samiye Yaman/Notebook/Lab 571/2011/10/12

From OpenWetWare

< User:Samiye Yaman | Notebook | Lab 571 | 2011 | 10
Revision as of 05:47, 18 October 2011 by Samiye Yaman (Talk | contribs)
(diff) ←Older revision | Current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search
Biomaterials Design Lab Main project page
Previous entry      Next entry

Entry title

Objective

Description

Data

- Epoxy was used to attach each of the wire on to the palladium foil individually.

-By using heat gun, each of the palladium foil with wire was heated until they stick together. (approximately 8 minutes)

-By using Krazy Glue, each of the palladium foil was attached to the teflon surface.

-By using heat gun, each of the palladium foil with wire was heated until they are fully attached to the teflon surface. (electrodes are formed.)

-The solution with AuNPs were placed over the electrodes and let to dry overnight.

Notes

This area is for any observations or conclusions that you would like to note.


Use categories like tags. Change the "Course" category to the one corresponding to your course. The "Miscellaneous" tag can be used for particular experiments, as instructed by your professor. Please be sure to change or delete this tag as required so that the categories remain well organized.



Personal tools