User:Samiye Yaman/Notebook/Lab 571/2011/10/12
Biomaterials Design Lab | <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page <html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html> </html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html> |
Entry titleObjectiveDescriptionData- Epoxy was used to attach each of the wire on to the palladium foil individually. -By using heat gun, each of the palladium foil with wire was heated until they stick together. (approximately 8 minutes) -By using Krazy Glue, each of the palladium foil was attached to the teflon surface. -By using heat gun, each of the palladium foil with wire was heated until they are fully attached to the teflon surface. (electrodes are formed.) -The solution with AuNPs were placed over the electrodes and let to dry overnight. NotesThis area is for any observations or conclusions that you would like to note.
|