User:Stuart McKellar/Notebook/Bird Sex Testing/2012/09/08: Difference between revisions

From OpenWetWare
Jump to navigationJump to search
Line 21: Line 21:


During the addition of the first solutions (1a & 1b) I used the pipette tip to disturb the blood. This pulled some of the fibres out from the paper that the blood was on. I don't think that this should hurt the reaction.
During the addition of the first solutions (1a & 1b) I used the pipette tip to disturb the blood. This pulled some of the fibres out from the paper that the blood was on. I don't think that this should hurt the reaction.
Primer prep:
*2550F - 5´-GTTACTGATTCGTCTACGAGA-3´
32.5nm (0.21mg)
Tm=51.2C
Added 325ul water to make up a 100uM/L stock soln (Taken from http://www.protocol-online.org/biology-forums/posts/23706.html)
He posted the following:
When I get my primer which comes as lyophilized, I resuspend it to 100 uM/L concentration. For example, for an amount of 28.5 nM of lyophilized primer (the amount is provided by the vendor), I add 285 ul water or TE buffer and get 100 uM/L stock solution. To prepare 10 uM/L (or 10 pm/ul) working solution, I take 10 ul stock solution and add to 90 ul water. As you can see, no calculations are needed.
-pcrman-
*2718R - 5´-ATTGAAATGATCCAGTGCTTG-3´
32.6nm
Tm=51.3C
Added 326ul water
Took 10ul of Primer and added to 90ul water to make a 10uM/L working solution.




Revision as of 02:33, 8 September 2012

Project name <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page
Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html>

Lab work for 8/9/2012

  • I am going to attempt the extraction of DNA from some samples using the EDNA extraction kit and protocol. If this is successful I will go on to run a PCR and a Gel.

I am using 4 samples of the Diamond Doves, as they are being caught again in 4 weeks so it is OK if they don't work.

Begin Lab work

Transferred samples to 0.5mL tubes:

  • 6AMC
  • L3#29
  • 8AMC
  • L3#21

Carried out extraction according to protocol for tissue EDNA hispex kit.

During the addition of the first solutions (1a & 1b) I used the pipette tip to disturb the blood. This pulled some of the fibres out from the paper that the blood was on. I don't think that this should hurt the reaction.

Primer prep:

  • 2550F - 5´-GTTACTGATTCGTCTACGAGA-3´

32.5nm (0.21mg) Tm=51.2C Added 325ul water to make up a 100uM/L stock soln (Taken from http://www.protocol-online.org/biology-forums/posts/23706.html)

He posted the following: When I get my primer which comes as lyophilized, I resuspend it to 100 uM/L concentration. For example, for an amount of 28.5 nM of lyophilized primer (the amount is provided by the vendor), I add 285 ul water or TE buffer and get 100 uM/L stock solution. To prepare 10 uM/L (or 10 pm/ul) working solution, I take 10 ul stock solution and add to 90 ul water. As you can see, no calculations are needed. -pcrman-


  • 2718R - 5´-ATTGAAATGATCCAGTGCTTG-3´

32.6nm Tm=51.3C Added 326ul water

Took 10ul of Primer and added to 90ul water to make a 10uM/L working solution.




Retrieved from "https://openwetware.org/mediawiki/index.php?title=User:Stuart_McKellar/Notebook/Bird_Sex_Testing/2012/09/08&oldid=624396"