User:Timothee Flutre/Notebook/Postdoc/2011/12/14
From OpenWetWare
Project name  Main project page Previous entry Next entry 
Learn about mixture models and the EM algorithm(Caution, this is my own quickanddirty tutorial, see the references at the end for presentations by professional statisticians.)
The constraints are: and
As usual, it's easier to deal with the loglikelihood:
Let's take the derivative with respect to one parameter, eg. θ_{l}:
This shows that maximizing the likelihood of a mixture model is like doing a weighted likelihood maximization. However, these weights depend on the parameters we want to estimate! That's why we now switch to the missingdata formulation of the mixture model.
The observeddata likelihood (also called sometimes "incomplete" or "marginal", even though these appellations are misnomers) is still written the same way:
But now we can also write the augmenteddata likelihood, assuming all observations are independent conditionally on their membership: . And here is the augmenteddata loglikelihood (useful in the M step of the EM algorithm, see below):
In terms of graphical model, the Gaussian mixture model described here can be represented like this.
Here is the observeddata loglikelihood:
First we introduce the hidden variables by integrating them out:
Then, we use any probability distribution q on these hidden variables (in fact, we use a distinct distribution for each observation):
And here is the great trick, as explained by Beal: "any probability distribution over the hidden variables gives rise to a lower bound on l_{obs}". This is due to to the Jensen inequality (the logarithm is concave):
At each iteration, the E step maximizes the lower bound () with respect to the :
The Estep amounts to inferring the posterior distribution of the hidden variables given the current parameter θ^{(t)}:
Indeed, the make the bound tight (the inequality becomes an equality):
Then, at the M step, we use these statistics to maximize the new lower bound with respect to θ, and therefore find θ^{(t + 1)}.
As a result, the E step may not always lead to a tight bound.
First, let's remind us with the equation of Q:
A few important rules are required to write down the analytical formulas of the MLEs, but only from a highschool level (see here).
As usual, to find the maximum, we derive and equal to zero:
Now, to find the multiplier, we go back to the constraint:
Finally:
Finally:
Finally:
#' Generate univariate observations from a mixture of Normals #' #' @param K number of components #' @param N number of observations #' @param gap difference between all component means GetUnivariateSimulatedData < function(K=2, N=100, gap=6){ mus < seq(0, gap*(K1), gap) sigmas < runif(n=K, min=0.5, max=1.5) tmp < floor(rnorm(n=K1, mean=floor(N/K), sd=5)) ns < c(tmp, N  sum(tmp)) clusters < as.factor(matrix(unlist(lapply(1:K, function(k){rep(k, ns[k])})), ncol=1)) obs < matrix(unlist(lapply(1:K, function(k){ rnorm(n=ns[k], mean=mus[k], sd=sigmas[k]) }))) new.order < sample(1:N, N) obs < obs[new.order] rownames(obs) < NULL clusters < clusters[new.order] return(list(obs=obs, clusters=clusters, mus=mus, sigmas=sigmas, mix.weights=ns/N)) }
#' Return probas of latent variables given data and parameters from previous iteration #' #' @param data Nx1 vector of observations #' @param params list which components are mus, sigmas and mix.weights Estep < function(data, params){ GetMembershipProbas(data, params$mus, params$sigmas, params$mix.weights) } #' Return the membership probabilities P(zi=k/xi,theta) #' #' @param data Nx1 vector of observations #' @param mus Kx1 vector of means #' @param sigmas Kx1 vector of std deviations #' @param mix.weights Kx1 vector of mixture weights w_k=P(zi=k/theta) #' @return NxK matrix of membership probas GetMembershipProbas < function(data, mus, sigmas, mix.weights){ N < length(data) K < length(mus) tmp < matrix(unlist(lapply(1:N, function(i){ x < data[i] norm.const < sum(unlist(Map(function(mu, sigma, mix.weight){ mix.weight * GetUnivariateNormalDensity(x, mu, sigma)}, mus, sigmas, mix.weights))) unlist(Map(function(mu, sigma, mix.weight){ mix.weight * GetUnivariateNormalDensity(x, mu, sigma) / norm.const }, mus[K], sigmas[K], mix.weights[K])) })), ncol=K1, byrow=TRUE) membership.probas < cbind(tmp, apply(tmp, 1, function(x){1  sum(x)})) names(membership.probas) < NULL return(membership.probas) } #' Univariate Normal density GetUnivariateNormalDensity < function(x, mu, sigma){ return( 1/(sigma * sqrt(2*pi)) * exp(1/(2*sigma^2)*(xmu)^2) ) }
#' Return ML estimates of parameters #' #' @param data Nx1 vector of observations #' @param params list which components are mus, sigmas and mix.weights #' @param membership.probas NxK matrix with entry i,k being P(zi=k/xi,theta) Mstep < function(data, params, membership.probas){ params.new < list() sum.membership.probas < apply(membership.probas, 2, sum) params.new$mus < GetMlEstimMeans(data, membership.probas, sum.membership.probas) params.new$sigmas < GetMlEstimStdDevs(data, params.new$mus, membership.probas, sum.membership.probas) params.new$mix.weights < GetMlEstimMixWeights(data, membership.probas, sum.membership.probas) return(params.new) } #' Return ML estimates of the means (1 per cluster) #' #' @param data Nx1 vector of observations #' @param membership.probas NxK matrix with entry i,k being P(zi=k/xi,theta) #' @param sum.membership.probas Kx1 vector of sum per column of matrix above #' @return Kx1 vector of means GetMlEstimMeans < function(data, membership.probas, sum.membership.probas){ K < ncol(membership.probas) sapply(1:K, function(k){ sum(unlist(Map("*", membership.probas[,k], data))) / sum.membership.probas[k] }) } #' Return ML estimates of the std deviations (1 per cluster) #' #' @param data Nx1 vector of observations #' @param membership.probas NxK matrix with entry i,k being P(zi=k/xi,theta) #' @param sum.membership.probas Kx1 vector of sum per column of matrix above #' @return Kx1 vector of std deviations GetMlEstimStdDevs < function(data, means, membership.probas, sum.membership.probas){ K < ncol(membership.probas) sapply(1:K, function(k){ sqrt(sum(unlist(Map(function(p.ki, x.i){ p.ki * (x.i  means[k])^2 }, membership.probas[,k], data))) / sum.membership.probas[k]) }) } #' Return ML estimates of the mixture weights #' #' @param data Nx1 vector of observations #' @param membership.probas NxK matrix with entry i,k being P(zi=k/xi,theta) #' @param sum.membership.probas Kx1 vector of sum per column of matrix above #' @return Kx1 vector of mixture weights GetMlEstimMixWeights < function(data, membership.probas, sum.membership.probas){ K < ncol(membership.probas) sapply(1:K, function(k){ 1/length(data) * sum.membership.probas[k] }) }
GetLogLikelihood < function(data, mus, sigmas, mix.weights){ loglik < sum(sapply(data, function(x){ log(sum(unlist(Map(function(mu, sigma, mix.weight){ mix.weight * GetUnivariateNormalDensity(x, mu, sigma) }, mus, sigmas, mix.weights)))) })) return(loglik) }
EMalgo < function(data, params, threshold.convergence=10^(2), nb.iter=10, verbose=1){ logliks < vector() i < 1 if(verbose > 0) cat(paste("iter ", i, "\n", sep="")) membership.probas < Estep(data, params) params < Mstep(data, params, membership.probas) loglik < GetLogLikelihood(data, params$mus, params$sigmas, params$mix.weights) logliks < append(logliks, loglik) while(i < nb.iter){ i < i + 1 if(verbose > 0) cat(paste("iter ", i, "\n", sep="")) membership.probas < Estep(data, params) params < Mstep(data, params, membership.probas) loglik < GetLogLikelihood(data, params$mus, params$sigmas, params$mix.weights) if(loglik < logliks[length(logliks)]){ msg < paste("the loglikelihood is decreasing:", loglik, "<", logliks[length(logliks)]) stop(msg, call.=FALSE) } logliks < append(logliks, loglik) if(abs(logliks[i]  logliks[i1]) <= threshold.convergence) break } return(list(params=params, membership.probas=membership.probas, logliks=logliks, nb.iters=i)) }
## simulate data K < 3 N < 300 simul < GetUnivariateSimulatedData(K, N) data < simul$obs ## run the EM algorithm params0 < list(mus=runif(n=K, min=min(data), max=max(data)), sigmas=rep(1, K), mix.weights=rep(1/K, K)) res < EMalgo(data, params0, 10^(3), 1000, 1) ## check its convergence plot(res$logliks, xlab="iterations", ylab="loglikelihood", main="Convergence of the EM algorithm", type="b") ## plot the data along with the inferred densities png("mixture_univar_em.png") hist(data, breaks=30, freq=FALSE, col="grey", border="white", ylim=c(0,0.15), main="Histogram of data overlaid with densities inferred by EM") rx < seq(from=min(data), to=max(data), by=0.1) ds < lapply(1:K, function(k){dnorm(x=rx, mean=res$params$mus[k], sd=res$params$sigmas[k])}) f < sapply(1:length(rx), function(i){ res$params$mix.weights[1] * ds[[1]][i] + res$params$mix.weights[2] * ds[[2]][i] + res$params$mix.weights[3] * ds[[3]][i] }) lines(rx, f, col="red", lwd=2) dev.off() It seems to work well, which was expected as the clusters are well separated from each other... The classification of each observation can be obtained via the following command: ## get the classification of the observations memberships < apply(res$membership.probas, 1, function(x){which(x > 0.5)}) table(memberships)
