X-gal Staining Protocol

From OpenWetWare

(Difference between revisions)
Jump to: navigation, search
(New page: ==Overview== Replace this sentence with a brief description of the protocol and its goal. ==Materials== List reagents, supplies and equipment necessary to perform the protocol here. Fo...)
Line 1: Line 1:
-
 
==Overview==
==Overview==

Revision as of 20:12, 25 July 2008

Contents

Overview

Replace this sentence with a brief description of the protocol and its goal.

Materials

List reagents, supplies and equipment necessary to perform the protocol here. For those materials which have their own OWW pages, link to that page. Alternatively, links to the suppliers' page on that material are also appropriate.

  • supply 1 (i.e. tubes of a certain size? spreaders?)
  • reagent 1
  • X μL reagent 2
    • component A (reagent 2 is made up of multiple components)
    • component B
  • equipment 1
  • equipment 2

Procedure

(Bruce Conklin and David Sanan, Gladstone/UCSF) Materials:

   * Potassium Ferrocyanide Crystalline (Fisher Scientific #P232-500
   * Potassium Ferrocyanide Trihydrate (Fisher Scientific #P236-500)
   * Magnesium Chloride (Fisher Scientific #M33-500)
   * 1X PBS
   * X-gal (Boehringer Mannheim #745-740)
   * DMSO
   * 2% Formaldehyde 0.2% Gluteraldehyde in 1 X PBS
   * Superfrost/ Plus Microscope Slides (Fisher #12-550-15)
   * Pap pen (Electron Microscopy Sciences #22303)
   * Nuclear Fast Red ( also called Kernechtrot)
   * Gel Mount (Biomeda, M01)
     Solutions:
     1) Solution A:
     5mM Potassium Ferricyanide Crystalline
     5mM Potassium Ferricyanide Trihydrate
     2mM Magnesium Chloride
     in 1 X PBS
     (stored at 4 deg, protected from light, then warm to 37 degrees C prior to using)

2) X-gal Stock Solution (40X): 40 mg/ml in DMSO (100 mg in 2.5 ml DMSO) (store at -20 deg, protected from light)

3) Final X-gal Solution: Dilute X-gal stock solution 1:40 in Solution A. (first warm Solution A to 37 degrees C to prevent precipitation of X-gal)

4) Formalin/Glutaraldehyde fixative: 12.3 ml distilled water 10.0 ml 1% glutaraldehyde 2.7 ml formaldehyde stock (37%) 25.0 ml x2 saline buffer

Staining Protocol:

  1. Cut 10 micrometers cryostat sections onto pap-penned slides from fresh-frozen tissues. Immerse immediately into cold formaldehyde/gluteraldehyde 5 minutes, then rinse in dH20 for 60 seconds.
  2. Let section dry completely onto slide
  3. Rinse with 1X PBS
  4. Apply Final X-gal Solution to sections and incubate at 37 deg; for 30 minutes to 24 hours (Check sections under microscope every 2 hours for development of blue staining)
  5. Rinse with 1X PBS
  6. Wash 2 X 2 with deionized H2O.
  7. Counterstain 3 with Nuclear Fast Red
  8. Wash as in step 6, then cover slip with Gel Mount 

References

Relevant papers and books

  1. Goldbeter A and Koshland DE Jr. . pmid:6947258. PubMed HubMed [Goldbeter-PNAS-1981]
  2. JACOB F and MONOD J. . pmid:13718526. PubMed HubMed [Jacob-JMB-1961]
  3. Mark Ptashne. A genetic switch. Cold Spring Harbor, N.Y.: Cold Spring Harbor Laboratory Press, 2004. isbn:0879697164. [Ptashne-Genetic-Switch]
All Medline abstracts: PubMed HubMed

Contact

  • Who has experience with this protocol?

or instead, discuss this protocol.


Personal tools