Yu:Transformation

From OpenWetWare

(Difference between revisions)
Jump to: navigation, search
m
Line 1: Line 1:
{{Template:Yu}}
{{Template:Yu}}
-
{| border="0" cellpadding="5"  
+
__TOC__
-
|+'''High-Efficienty Lithium Acetate Transformation for ''S. cerevisiae'''''
+
 
-
|width="600px"|1. Grow yeast cells in [[Yu:YEPD|YEPD]] to late-log phase (1-2 x 10<sup>7</sup> cells/mL) at 30°C
+
===Integration===
-
|width="200px"|Grow yeast
+
{| border="0" cellpadding="5"
 +
|+ '''''High-Efficienty Lithium Acetate Transformation for S. cerevisiae'''''
 +
|valign="top"|1. Grow yeast cells in [[Yu:YEPD|YEPD]] to late-log phase (1-2 x 10<sup>7</sup> cells/mL) at 30°C
|-
|-
|valign="top"|2. Subculture overnight yeast culture at 1:100 in fresh YEPD and grow on a rocker for 3-4 hours at 30°C
|valign="top"|2. Subculture overnight yeast culture at 1:100 in fresh YEPD and grow on a rocker for 3-4 hours at 30°C
-
|valign="top"|Subculture 100μL into 10mL YEPD and grow for 3-4 hours
 
|-
|-
|valign="top"|3. Transfer the 10mL yeast culture into a 15mL tube and spin down at 2000 RPM for 2 minutes.
|valign="top"|3. Transfer the 10mL yeast culture into a 15mL tube and spin down at 2000 RPM for 2 minutes.
-
|valign="top"|Spin down at 2k RPM for 2 minutes
 
|-
|-
|valign="top"|4. Discard YEPD supernatant and resuspend pellet in 10mL sterile H<sub>2</sub>O. Spin down again at 2000 RPM for 2 minutes
|valign="top"|4. Discard YEPD supernatant and resuspend pellet in 10mL sterile H<sub>2</sub>O. Spin down again at 2000 RPM for 2 minutes
-
|valign="top"|Discard supernatant and wash in 10mL sterile water
 
|-
|-
|valign="top"|5. Discard H<sub>2</sub>O supernatant and resuspend pellet in 1mL sterile H<sub>2</sub>O. Transfer to a 1.5mL sterile eppendorf tube and spin down at 12000 RPM for 10 seconds
|valign="top"|5. Discard H<sub>2</sub>O supernatant and resuspend pellet in 1mL sterile H<sub>2</sub>O. Transfer to a 1.5mL sterile eppendorf tube and spin down at 12000 RPM for 10 seconds
-
|valign="top"|Discard supernatant, resuspend in 1mL sterile H<sub>2</sub>O in a 1.5mL tube, and spin down
 
|-
|-
|valign="top"|7. Discard supernatant, resuspend the pellet in 1mL fresh 1x [[Yu:LiOAc|LiOAc/TE]], then spin down at 12000 RPM for 10 seconds again
|valign="top"|7. Discard supernatant, resuspend the pellet in 1mL fresh 1x [[Yu:LiOAc|LiOAc/TE]], then spin down at 12000 RPM for 10 seconds again
-
|valign="top"|Wash in 1mL 1x [[Yu:LiOAc|LiOAc/TE]]
 
|-
|-
|valign="top"|8. Discard supernatant, resuspend the pellet in 1mL fresh 1x [[Yu:LiOAc|LiOAc/TE]] a second time, then spin down at 12000 RPM for 10 seconds again
|valign="top"|8. Discard supernatant, resuspend the pellet in 1mL fresh 1x [[Yu:LiOAc|LiOAc/TE]] a second time, then spin down at 12000 RPM for 10 seconds again
-
|valign="top"|Wash a second time in 1mL 1x [[Yu:LiOAc|LiOAc/TE]]
 
|-
|-
|valign="top"|9. Discard supernatant and resuspend the pellet in 75μL 1x [[Yu:LiOAc|LiOAc/TE]]
|valign="top"|9. Discard supernatant and resuspend the pellet in 75μL 1x [[Yu:LiOAc|LiOAc/TE]]
-
|valign="top"|Resuspend in 75μL 1x [[Yu:LiOAc|LiOAc/TE]]
 
|-
|-
|valign="top"|10. Add 5μL boiled ssDNA to protect plasmid DNA from DNAse degredation
|valign="top"|10. Add 5μL boiled ssDNA to protect plasmid DNA from DNAse degredation
-
|valign="top"|Add 5μL boiled ssDNA
 
|-
|-
|valign="top"|11. Add 1μg plasmid DNA or PCR product
|valign="top"|11. Add 1μg plasmid DNA or PCR product
-
|valign="top"|Add DNA
 
|-
|-
|valign="top"|12. Incubate at 30°C for 30 minutes on a rocker
|valign="top"|12. Incubate at 30°C for 30 minutes on a rocker
-
|valign="top"|Incubate 30°C for 30 minutes
 
|-
|-
|valign="top"|13. Add 300μL 40% PEG in LiOAc and vortex thoroughly
|valign="top"|13. Add 300μL 40% PEG in LiOAc and vortex thoroughly
-
|valign="top"|Add 300μL 40% PEG
 
|-
|-
-
|colspan="2" align="center"|
+
|align="center"|
-
{|border="0" cellpadding="5"
+
{|border="1"  
-
|+ '''300μL 40% PEG in LiOAc/TE'''
+
|+'''300μL 40% PEG in LiOAc/TE'''
-
|240μL 50% PEG, sterile filtered
+
|-
|-
-
|60μL 5x [[Yu:LiOAc|LiOAc/TE]]. Do not use 1x LiOAc/TE
+
|align="center"|240μL 50% PEG, sterile filtered
 +
|-
 +
|align="center"|60μL 5x [[Yu:LiOAc|LiOAc/TE]]. Do not use 1x LiOAc/TE
|}
|}
|-
|-
|align="left" valign="top"|14. Incubate again at 30°C for 30 minutes on a rocker
|align="left" valign="top"|14. Incubate again at 30°C for 30 minutes on a rocker
-
|valign="top"|Incubate 30°C for 30 minutes
 
|-
|-
-
|valign="top"|15. AdμLd 35μL DMSO and heat shock at 42°C for 15 minutes
+
|valign="top"|15. Add 35μL DMSO and heat shock at 42°C for 15 minutes
-
|valign="top"|Add 35μL DMSO, heat shock 42°C for 15 minutes
+
|-
|-
|valign="top"|16. For antimicrobial screening, such as G418 or CLONAT, add the entire mixture to 5mL of YEPD and incubate at 30°C for 3 hours to allow recovery and the production of resistance proteins. Otherwise, if screening with amino acid synthesis, like His<sup>+</sup> or Leu<sup>+</sup>, skip this step
|valign="top"|16. For antimicrobial screening, such as G418 or CLONAT, add the entire mixture to 5mL of YEPD and incubate at 30°C for 3 hours to allow recovery and the production of resistance proteins. Otherwise, if screening with amino acid synthesis, like His<sup>+</sup> or Leu<sup>+</sup>, skip this step
-
|valign="top"|Recover in 5mL YEPD at 30°C for 3 hours if needed
 
|-
|-
|valign="top"|17. Spin down for 10 seconds at 12000 RPM and discard supernatant
|valign="top"|17. Spin down for 10 seconds at 12000 RPM and discard supernatant
-
|valign="top"|Spin down and discard supernatant
 
|-
|-
|valign="top"|18. Resuspend cells in 200μL TE<sub>8</sub> and plate on selective media with glass beads or a spreader
|valign="top"|18. Resuspend cells in 200μL TE<sub>8</sub> and plate on selective media with glass beads or a spreader
-
|valign="top"|Resuspend in 200μL TE<sub>8</sub> and plate
+
|}
 +
===Plasmid Transformation===
 +
{| border="0" cellpadding="5"
 +
|+ '''''High-Efficienty Lithium Acetate Plasmid Transformation for S. cerevisiae'''''
 +
|valign="top"|1. Grow yeast cells in [[Yu:YEPD|YEPD]] or plasmid-maintaining selective media to late-log phase (1-2 x 10<sup>7</sup> cells/mL) at 30°C
 +
|-
 +
|valign="top"|2. Subculture overnight yeast culture at 1:100 in fresh YEPD or plasmid-maintaining selective media and grow on a rocker for 3-4 hours at 30°C
 +
|-
 +
|valign="top"|3. Transfer the 10mL yeast culture into a 15mL tube and spin down at 2000 RPM for 2 minutes.
 +
|-
 +
|valign="top"|4. Discard YEPD supernatant and resuspend pellet in 10mL sterile H<sub>2</sub>O. Spin down again at 2000 RPM for 2 minutes
 +
|-
 +
|valign="top"|5. Discard H<sub>2</sub>O supernatant and resuspend pellet in 1mL sterile H<sub>2</sub>O. Transfer to a 1.5mL sterile eppendorf tube and spin down at 12000 RPM for 10 seconds
 +
|-
 +
|valign="top"|7. Discard supernatant, resuspend the pellet in 1mL fresh 1x [[Yu:LiOAc|LiOAc/TE]], then spin down at 12000 RPM for 10 seconds again
 +
|-
 +
|valign="top"|8. Discard supernatant, resuspend the pellet in 1mL fresh 1x [[Yu:LiOAc|LiOAc/TE]] a second time, then spin down at 12000 RPM for 10 seconds again
 +
|-
 +
|valign="top"|9. Discard supernatant and resuspend the pellet in 75μL 1x [[Yu:LiOAc|LiOAc/TE]]
 +
|-
 +
|valign="top"|10. Add 5μL boiled ssDNA
 +
|-
 +
|valign="top"|11. Add 1μg plasmid DNA
 +
|-
 +
|valign="top"|12. Add 300μL 40% PEG
 +
|-
 +
|valign="top"|13. Incubate at 30°C for 30 minutes
 +
|-
 +
|valign="top"|14. Heat shock at 42°C for 15 minutes
 +
|-
 +
|valign="top"|15. Spin down at 5000 RPM for 1 minute, pipette off supernatant, resuspend in 150μL TE<sub>8</sub>, and plate onto selective media
 +
|}

Revision as of 18:05, 26 February 2010

Home       Procedures       | Lab Members       | Publications       | Research Interests       | Internal Database       Image:UBLogo.jpg


Contents


Integration

High-Efficienty Lithium Acetate Transformation for S. cerevisiae
1. Grow yeast cells in YEPD to late-log phase (1-2 x 107 cells/mL) at 30°C
2. Subculture overnight yeast culture at 1:100 in fresh YEPD and grow on a rocker for 3-4 hours at 30°C
3. Transfer the 10mL yeast culture into a 15mL tube and spin down at 2000 RPM for 2 minutes.
4. Discard YEPD supernatant and resuspend pellet in 10mL sterile H2O. Spin down again at 2000 RPM for 2 minutes
5. Discard H2O supernatant and resuspend pellet in 1mL sterile H2O. Transfer to a 1.5mL sterile eppendorf tube and spin down at 12000 RPM for 10 seconds
7. Discard supernatant, resuspend the pellet in 1mL fresh 1x LiOAc/TE, then spin down at 12000 RPM for 10 seconds again
8. Discard supernatant, resuspend the pellet in 1mL fresh 1x LiOAc/TE a second time, then spin down at 12000 RPM for 10 seconds again
9. Discard supernatant and resuspend the pellet in 75μL 1x LiOAc/TE
10. Add 5μL boiled ssDNA to protect plasmid DNA from DNAse degredation
11. Add 1μg plasmid DNA or PCR product
12. Incubate at 30°C for 30 minutes on a rocker
13. Add 300μL 40% PEG in LiOAc and vortex thoroughly
300μL 40% PEG in LiOAc/TE
240μL 50% PEG, sterile filtered
60μL 5x LiOAc/TE. Do not use 1x LiOAc/TE
14. Incubate again at 30°C for 30 minutes on a rocker
15. Add 35μL DMSO and heat shock at 42°C for 15 minutes
16. For antimicrobial screening, such as G418 or CLONAT, add the entire mixture to 5mL of YEPD and incubate at 30°C for 3 hours to allow recovery and the production of resistance proteins. Otherwise, if screening with amino acid synthesis, like His+ or Leu+, skip this step
17. Spin down for 10 seconds at 12000 RPM and discard supernatant
18. Resuspend cells in 200μL TE8 and plate on selective media with glass beads or a spreader

Plasmid Transformation

High-Efficienty Lithium Acetate Plasmid Transformation for S. cerevisiae
1. Grow yeast cells in YEPD or plasmid-maintaining selective media to late-log phase (1-2 x 107 cells/mL) at 30°C
2. Subculture overnight yeast culture at 1:100 in fresh YEPD or plasmid-maintaining selective media and grow on a rocker for 3-4 hours at 30°C
3. Transfer the 10mL yeast culture into a 15mL tube and spin down at 2000 RPM for 2 minutes.
4. Discard YEPD supernatant and resuspend pellet in 10mL sterile H2O. Spin down again at 2000 RPM for 2 minutes
5. Discard H2O supernatant and resuspend pellet in 1mL sterile H2O. Transfer to a 1.5mL sterile eppendorf tube and spin down at 12000 RPM for 10 seconds
7. Discard supernatant, resuspend the pellet in 1mL fresh 1x LiOAc/TE, then spin down at 12000 RPM for 10 seconds again
8. Discard supernatant, resuspend the pellet in 1mL fresh 1x LiOAc/TE a second time, then spin down at 12000 RPM for 10 seconds again
9. Discard supernatant and resuspend the pellet in 75μL 1x LiOAc/TE
10. Add 5μL boiled ssDNA
11. Add 1μg plasmid DNA
12. Add 300μL 40% PEG
13. Incubate at 30°C for 30 minutes
14. Heat shock at 42°C for 15 minutes
15. Spin down at 5000 RPM for 1 minute, pipette off supernatant, resuspend in 150μL TE8, and plate onto selective media
Personal tools