Objectives
- Continue testing the 30% Bentonite beads
- Test the 40% Bentonite beads
Procedure
- Testing the 30% Bentonite beads
- The 30% Bentonite beads were tested using the same method as that from before.
- Testing the 40% Bentonite beads
- The 40% Bentonite beads were tested using the same method as that from before.
Observations
- 30% Bentonite beads from solution:
- Another 7 MG rinses were performed, bringing the total to 23 MG rinses.
- The 30% Bentonite beads are still absorbing all of the MG stock solution, further necessitating more MG rinses; however, we predict that only a few more rinses will be necessary before MG begins to elute from the beads.
- 40% Bentonite beads from solution:
- 8 MG rinses were performed, further rinses will be necessary.
- About 12 drops per minute
- The 40% Bentonite beads should take longer to elute MG from the column than the previous columns before it; therefore, we predict that many more MG rinses will be necessary.
|