User:Linh N Le/Notebook/2009/08/10: Difference between revisions
From OpenWetWare
Line 36: | Line 36: | ||
*When the temp said 37C, the meter only read ~27C | *When the temp said 37C, the meter only read ~27C | ||
*Cranking up the temp (maxes out at 60) | *Cranking up the temp (maxes out at 60) | ||
*To measure the temp, i tossed the DVM and probe into the incubator and shut the lid | |||
*The probe is sitting on the bottom of the incubator, possibly touching the floor, but most likely not | |||
**I'm trying to measure air temp, and I am assuming the actual temp is a bit higher than what the meter is reading from the air | |||
*Right now the display says 50 and the meter is reading 33-34C | |||
* | |||
<!-- ##### DO NOT edit below this line unless you know what you are doing. ##### --> | <!-- ##### DO NOT edit below this line unless you know what you are doing. ##### --> | ||
|} | |} |
Revision as of 17:00, 10 August 2009
Project name | <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page <html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html> </html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html> |
To Do
Innova 4300
Temp Tests
|