User:Megan L. Channell/Notebook/3D printing scaffolds with Au nanofibers/2014/01/29

From OpenWetWare

(Difference between revisions)
Jump to: navigation, search
(Entry title)
(Entry title)
Line 6: Line 6:
| colspan="2"|
| colspan="2"|
<!-- ##### DO NOT edit above this line unless you know what you are doing. ##### -->
<!-- ##### DO NOT edit above this line unless you know what you are doing. ##### -->
-
==Entry title==
+
==Method==
* There were a total of 12 gold: nanofiber solutions made, with all of them being the same
* There were a total of 12 gold: nanofiber solutions made, with all of them being the same
*The ratio of myoglobin to gold was 100:1 and the concentration of gold was 0.25mM
*The ratio of myoglobin to gold was 100:1 and the concentration of gold was 0.25mM
Line 12: Line 12:
*The other 9 will be used to make the other two methods
*The other 9 will be used to make the other two methods
*They were put in an oven for 4hrs at 80°C
*They were put in an oven for 4hrs at 80°C
 +
==Calculations==
==Calculations==
*Au stock solution:
*Au stock solution:

Revision as of 01:06, 7 February 2014

Project name Main project page
Previous entry      Next entry

Method

  • There were a total of 12 gold: nanofiber solutions made, with all of them being the same
  • The ratio of myoglobin to gold was 100:1 and the concentration of gold was 0.25mM
  • Three of the solutions will have the scaffolds in them as this is our first method
  • The other 9 will be used to make the other two methods
  • They were put in an oven for 4hrs at 80°C

Calculations

  • Au stock solution:
    • 0.011g x (1 mol/393.833g) x 0.010L = 2.793mM
  • Myoglobin stock solution:
    • 0.011g x (1 mol/17699g) x 0.010L = 0.0621mM
  • Volumes of Au, Myoglobin, and water for each test tube:
    • Final [Au]=0.25mM, 5mL total volume




Personal tools