Koch Lab:Research/How to build your own laser diode/Parts list
From OpenWetWare
Jump to navigationJump to search
Laser components
Below is a beginning compilation for the parts needed to make the OEM laser diode system. A complete list will follow.
| Component | Model | Cost | Manual/Spec Sheet | CAD Drawing | Sketchup |
| Laser diode & temperature controller | ITC133 | $588.00 | Yes | Yes | |
| Front Panel | ITC100F | $48.00 | No | Yes | |
| Display panel | ITC100D | $150.00 | Yes | Yes | |
| Temperature cooled mount for diode | TCLDM9 | $432.00 | Yes | Yes | |
| Communication Cable | CAB430 | $120.00 | No | No | |
| Cheap 35 mW Diode | HL6738MG | $55.10 | Yes | No | |
| Asphere for collimation | C340TM-B | $89.00 | No | Yes | |
| Asphere holder | S1TM09 | $20.10 | No | Yes | Yes |
| Power Supply | IHCC15-3.0 | $98.85 | No | No | |
| Enclosure | AU-1040 | $22.40 | No | Yes | Yes |
| Back plane connector | 5650408-4 | $5.75 | No | ||
| Fan | FBA08A12L1AZ | $8.68 | |||
| Headers | 22-28-4360 | $1.74 | |||
| Header housings | 65039-036LF | $0.71 | |||
| Header crimp connector | 47747-000LF | $0.37 | |||
| Yellow LED | 5100H7 | $1.33 | |||
| Gree LED | 5100H5 | $1.33 | |||
| SPDT Switches | 100SP1T1B1M1REH | $3.00 | |||
| Banana plugs | 108-0903-001 | $0.59 | |||
| Fan | FBA08A12L1AZ | $8.68 | |||
| Fan guard | 08132 | $0.82 | |||
| Small fan guard | 08346 | $0.64 | |||
| 1 kΩ resistors | CFR-25JB-1K0 | $0.32 | |||
| Right angle headers | 22-28-8361 | $2.92 | |||
| Standoffs | 1803 | $5.47 | |||
| Feet | 51 | $0.47 | |||
| Copper clad proto board | 503 | $4.42 | |||
| DPST switch | JWMW21RA1A | $9.60 | |||
| Power cord | AK500/U-2-R | $8.91 | |||
| Heat shrink tubing | 278-1610 | $3.99 | |||
| Wire | 278-1224 | $6.59 | |||
| Fuse | |||||
| Fuse holder | |||||
| Power entry | |||||
| Perforated aluminum | 9232T121 | $35.50 | |||
| #4 Screws | |||||
| #10 Screws |
